DBB Valves and SBB Valves

Metroasea > Valves > DBB Valves and SBB Valves
DESIGNOTHER KEY FEATURESMATERIALS

Design Type
Ball Type
Needle Type
SBB, DBB, SB and DB variance
Ball-Ball-Ball, Ball-Needle-Ball or all needles configuration

Features
One pc forged body design incorporating all valves
3-pcs bolted body for ISO 17292 DBB valve
Screwed or flanged vent outlet
Bore sizes of 10mm, 14mm, 20mm, 25mm, 40mm and 50mm
Built in cavity relief

Design Standard
NACE MR-0-75/ ISO 17292

End Connection
Flanged – Flange to ANSI B16.5 RF or RTJ
Flanged-Threaded to ANSI B1.20.1
ISO 228 – ISO 7/1
Welding BW or SW

Options
Customized variants to specific client requirements:-
– With Integral check valve
– Chemical injection and process sampling options

Sizes
3/8” -2” Class 150 – 2500 (rated to schedule rating)

Materials
A216, A105, LF2, 316, 316L, 304, 304L, F51, NiAlBr and Other
Cast Steel or Equivalent Alloys can be offered upon
project specification requests

Testing
Every DBB and SBB valves is factory tested hydrostatically
to a requirement of zero visible leakage. A shell test is
performed at 1.5X maximum rated working pressure and
a seat test is performed at 1.1X maximum rated working
pressure in accordance to API 598 and BS EN 12266-1. A
low pressure gas seat test is performed in accordance
with API 598 and BS EN 12266-1


Enquiry